Industry Insights
Technical guides · Formulation best practices · Industry updates
PTFE Impregnation for Industrial Textiles: Conveyor Belts, Filters & Gaskets
PTFE Impregnation for Industrial Textiles: Conveyor Belts, Filters & Gaskets
PTFE Non-Stick Coating Formulation Guide: Cookware, Bakeware & Industrial
PTFE Non-Stick Coating Formulation Guide: Cookware, Bakeware & Industrial
Fluorinated Leveling Agents for Automotive Refinish: BYK-340 Alternatives
Fluorinated Leveling Agents for Automotive Refinish: BYK-340 Alternatives
PFAS-Free Wetting Agents for Waterborne Coatings: Regulatory Guide + Solutions
PFAS-Free Wetting Agents for Waterborne Coatings: Regulatory Guide + Solutions
Fluorosurfactant Selection Guide: Anionic vs Non-Ionic vs Polymeric
Fluorosurfactant Selection Guide: Anionic vs Non-Ionic vs Polymeric
PTFE Micropowder vs Wax Additives: Selection Guide for Coatings
PTFE Micropowder vs Wax Additives: Selection Guide for Coatings
PTFE Micropowder in Powder Coatings: Scratch Resistance for Architectural Aluminum
PTFE Micropowder in Powder Coatings: Scratch Resistance for Architectural Aluminum
Additives for Interior Emulsion Paints: Thickeners, Defoamers, and Preservatives
Interior emulsion paints rely on a carefully balanced additive package to deliver the right application properties, storage stability, and shelf life. Getting thickeners, defoamers, and in-can preservatives right — and understanding how they interact — is the difference between a paint that sells and one that fails in the field.
UV-Curable Coatings: Photoinitiators, Oligomers, and Reactive Diluents Explained
UV-curable coatings cure in fractions of a second under UV light, delivering outstanding hardness, chemical resistance, and production throughput. Understanding how photoinitiators, oligomers, and reactive diluents work together — and how to balance cure speed against surface and through-cure — is the foundation of successful UV formulation.
Anti-Flash Rust Additives: Preventing Early Rust in Water-Based Metal Primers
Flash rust — the orange-brown staining that appears within hours of applying a water-based primer to bare steel — is one of the most visible failure modes of waterborne metal coatings. This guide covers the chemistry of flash rust, how inhibitor packages work, and how to formulate for reliable protection.
Crosslinkers for Waterborne 2K Systems: Aziridine, Carbodiimide, and Isocyanate Compared
Two-component waterborne coatings deliver the chemical and mechanical resistance of traditional solvent-based 2K systems at significantly lower VOC. Choosing between aziridine, carbodiimide, and waterborne isocyanate crosslinkers depends on pot life requirements, substrate, and curing conditions.
Wetting Agents in Waterborne Coatings: How to Eliminate Cratering and Fish-Eyes
Cratering and fish-eyes are among the most frustrating defects in waterborne coatings — and both trace back to surface tension dynamics during film formation. Understanding dynamic vs. static surface tension, and how silicone and polyether wetting agents address each, is the key to eliminating these defects.
Stay ahead of the market
Get the latest coating & ink additive insights delivered to your inbox.